ISDN测试仪(BRI PRI）德国 在所有的通用接口测试语音质量
ARGUS 125是一个功能强大的ISDN测试仪
包括：
-PRI和BRI接口在TE和NT模式
-PRI和BRI D通道监测（被动）
-U接口（或者与2B1Q或4B3T）
-专线（BRI或PRI和W / O D通道）
-128 kBit BERT* U接口和BRI线路租用
- e1-bert *使用B通道同时（megabert *）
- V5.1 / V5.2监视器（3播发/多E1链路）
POTS:
集成模拟试验机DTMF and CLIP的支持
- 2线的高—Z监视器电压测量
?ADSL调制解调器仿真*（ATU-R），支持各种标准
?以太网接口*（10/100 BASE-T），路由器/桥接模式
?ATM层测试* W / ATM的OAM平/环和VPI / VCI扫描
?IP特性*宽/ IP协议的ping，路由跟踪测试，（DHCP，VLAN）
- 下载测试吞吐率评估（HTTP，FTP上/下）
?VoIP测试功能*，包括自带音响和评估板
直接通过ADSL和/或以太网采用MOS管，语音质量
?遥控测量，包括环路长度的计算
?使用测试结果文件*自动化的测试访问
报告存储在ARGUS?和/或在PC上
?通过USB或RS232（EIA232）接口将数据传送到PC机
?WINanalyse*，PC软件用于D信道解码和/或用于
执行一个ADSL长期的分析，生动地说明
?易于操作，用户自定义和预定义的测试方案
?内部充电??标准电池或交流电源供电
?免费软件更新的下载，请MIDWEST集团
ARGUS?125 - ISDN PRI功能
?符合ETS 300011，ITU-T G.703 E1-PRI接口
HDB3码，自动CRC检测
?直接操作的优先级的U接口上，4线（TE/ NT模式）
?操作模式：
- TE模式（终端仿真）新台币模式（网络仿真）
- D信道监控模式（高阻），被动
overplugging到PRI接入在线记录在PC或
内部存储器，内部解码
- D IN TE/ NT模式，以PC机或记忆，诠释道痕迹。解码
- 支持内部解码
?自动检测协议和访问配置
（CRC开/关）：DSS1
?附加协议：短号-T/ N/ NQ，QSIG，VN4
?1层告警（CRC-4, AIS, FAS, E-Bit, A-Bit, frame error, code
error, Sax display）
?第1层主/从操作，使用SAX命令TE/ NT
?自动化测试场景进行访问验证和数据保存在
在ARGUS?创建测试报告
?自动服务测试：确定哪些ISDN服务
可在此访问，在发送和接收方向
?补充业务的自动测试
为DSS1：自动测试夹，CLIR，COLP，COLR，CFU，
HOLD，TP，CFB，CFNR，AOC-D / E，CCBS，CCNR，连续，MCID，
ECT，3PTY，DDI，，SUB，UUS，CUG，光盘，
支持键盘协议的“夹不筛选"
?功能与呼叫热按钮
- 记忆10个数字或键盘协议
命令，X.31测试号，自己的号码，重拨
- 显示来电：主叫和被叫号码，
B信道，服务数目的类型和编号计划，显示
信息元素，子地址和UUS-1数据
- 期间和在通话结束显示：AOC-D，AOC-E W /结算
事业所数/文并包括地点，信息显示
元素，双音多频数据
?可选的B信道，整栋或重叠信号
按照瓦特/ ITU-T G.821?误码率测试（BERT），评价
- 扩展自我来电或终端到终端的BERT
- 显示比特错误和比特错误率，确定/挪威克朗评价
- G.821分析：ES，EFS，SES，美国，德国马克和确定评价
- 可选择的服务，手动进样位错误
- 在ACC位模式。 W / ITU-T O.150：2E11-1，2E15-1，用户自定义
- 测量时间：1分钟到无限
- 循环中的所有或选定的B信道
有声报警比特错误和服务水平，服务水平计数器
- 同时E1误码仪上的所有B信道（MegaBERT*）
- 中环同步箱和自我调用多个环节
?号的编号计划型配置
的ISDN专线?测试：
- 功能和BERT
- 可选择的B信道和两个并行BERT
- 循环中的所有或选定的B信道
?TE/ NT的仿真不同的ISDN服务
?通过数字/文字包括显示zui重要的信息交换的原因。 LOC。
ARGUS?125 - ISDN BRI功能
?按照ITU-T的I.430 BRI接口
?操作模式：
- TE（终端仿真），新界模式（网络仿真），喜欢的PRI
- ，被动监测BRI，功能范围类似的PRI
?自动检测接入的配置：
- 点 - 点（PP）或点对点，点对多点（P-MP）
- 检测DSS1协议
?附加协议：短号-T/ - N/-NQ，QSIG，VN4
?显示层1，2，3和B信道的状态
?显示的第1层信息（信息0到信息4）
?召唤（取决于交易所的支持）
?ISDN业务和补充业务自动测试
- 类似于优先级的功能范围
?与审讯总线状态的测试;设置，显示和信息交换
主动呼叫转移CFU，CFB，CFNR为大家服务
?两个同时连接（环框和扩展自呼）
?在D和B通道自动X.31试验
- “分组数据在D信道可用？"
- 自动检测将TEI中的帧处理激活
- X.31仿真（四） - 末端到X.25网络
?延迟的测量，往返延迟和信道间的延迟
?1层测试：测量和幻象饲料评价
（好吧，正常或受限电源）和层1发送/接收
在NTBA或PABX的信号电平
?D信道误码仪不同的位模式，如优先级
（与其他测试兼容）
ARGUS?125 - ISDN U接口功能
?U接口符合ETR80/ ANSI T1.601
?线路编码：4B3T或提供2B1Q
?在U上的TE模式测试界面相同，在BRI/ PRI
?U接口电压和确定评价的测量
?可编程直流负载（高达1200毫瓦，包括U / I测量）
?高阻监视与监听到U接口（请参阅POTS）
ARGUS?125 - 模拟功能（POTS）
?POTS接口，双音多频和脉冲拨号模式
?闪光功能（40-1000毫秒）
?回路电流限制
?POTS电压测量包括。极性（用于拖/摘机）
?夹等来电显示服务的累计。 ETS 300七百七十八分之六百五十九
?支持显示FSK和DTMF来电显示
?可调DTMF信号电平，信号和间隔长度
?高阻监测与非侵入式监听到的POTS（像U）
- 包括电压测量。极性
在TE模式高达150 V
在监控模式下可达250 V
- 夹，日期，时间，来电显示服务的在线显示
- 的DTMF拨号音包括在线显示。 A，B，C，D，*，＃
Testing speech quality on all common interfaces
? ISDN: ARGUS?125 is a powerful ISDN tester, it includes:
- PRI and BRI interface in TE and NT mode
- PRI and BRI D channel monitoring (passive)
- U interface (alternatively with 2B1Q or 4B3T)
- Leased lines (BRI/PRI with and w/o D channel)
- 128 kBit BERT* on U interface and BRI leased lines
- E1-BERT* using all B channels simultaneously (MegaBERT*)
- V5.1/V5.2 monitor* (up to 3 timeslots / multiple E1 links)
POTS: integrated analog tester with support of DTMF and CLIP
- 2-wire high-Z monitor with voltage measurement
? ADSL modem emulation* (ATU-R), supports various standards
? Ethernet interface* (10/100 Base-T), router / bridge mode
? ATM layer tests* w/ ATM-OAM ping/loop and VPI/VCI scan
? IP features* w/ IP ping, trace route test, (DHCP, VLAN)
- Download test for throughput evaluation (HTTP, FTP up/down)
? VoIP testing function*, includes own acoustics and evaluates
speech quality using MOS, directly via ADSL and/or Ethernet
? RC measuring, includes a loop length calculation
? Fully automated access tests with result documentation using test
reports, stored in ARGUS? and/or on PC
? Transmits data to PC using USB or RS232 (EIA232) interface
? WINanalyse*, PC software for D channel decoding and/or for
executing an ADSL long term analysis, graphically demonstrated
? Easy-to-operate, user definable and predefined test scenarios
? Internally rechargeable standard batteries or mains powered
? Free software updates by download please contact MIDWEST GROUP
ARGUS?125 – ISDN PRI features
? E1-PRI interface in accordance with ETS 300 011, ITU-T G.703
HDB3 Code, automatic CRC detection
? Operation directly on the PRI’s U interface, 4 wire (TE/NT mode)
? Operation modes:
- TE mode (terminal simulation) NT mode (network simulation)
- D channel monitor mode (high impedance), passive
overplugging to PRI-access with online recording on PC or the
internal memory, internal decode
- D channel trace in TE/NT mode to PC or memory, int. decode
- Supports internal decode
? Automatic detection of protocol and access-configuration
(CRC on/off): DSS1
? Additional protocols: Cornet-T / N / NQ, QSIG, VN4
? Layer 1 alarms (CRC-4, AIS, FAS, E-Bit, A-Bit, frame error, code
error, Sax display)
? Layer 1 master/slave operation, TE/NT using Sax commands
? Automated test scenarios for access verification and data saving in
the ARGUS? for creating test reports
? Automatic service test: determines which ISDN services are
available on this access, in send and receive direction
? Automatic test of the supplementary services
for DSS1: tests automatically CLIP, CLIR, COLP, COLR, CFU,
HOLD, TP, CFB, CFNR, AOC-D/E, CCBS, CCNR, CW, MCID,
ECT, 3PTY, DDI, , SUB, UUS, CUG, CD,
support of keypad protocol an ?CLIP no Screening“
? ephone functions with call-hot-button
- Call number memory for 10 numbers or keypad protocol
commands, X.31 test number, own number, redialing
- Displays for incoming calls: calling and called number,
B channel, service, type of number and numbering plan, display
info elements, SUB address and UUS-1 data
- Displays during and at the end of call: AOC-D, AOC-E w/ clearing
cause by number/text and including location, display of info
elements, DTMF data
? Selectable B channel, en-bloc or overlap signaling
? Bit error rate test (BERT), evaluated in accordance w/ ITU-T G.821
- Extended self-call or end-to-end BERT
- Displays bit errors and bit errors rate, OK/NOK evaluation
- G.821 analysis: ES, EFS, SES, US, DM and OK evaluation
- Selectable services, manual injection of bit errors
- Bit pattern in acc. w/ ITU-T O.150: 2E11-1, 2E15-1, user defined
- Measuring time: 1 min up to infinite
- Loop box for all or selected B channels
Audible alarms for bit errors and LOS, LOS counter
- Simultaneous E1 BERT on all B channels (MegaBERT*)
- Multiple links of loop box and self-call simultaneously
? Configuration of type of number an numbering plan
? Tests of ISDN leased lines:
- ephone function and BERT
- Selectable B channel and two concurrent BERT
- Loop box for all or selected B channels
? TE/NT-simulation with different ISDN-services
? Displays most important clearing causes by number/text incl. loc.
ARGUS?125 – ISDN BRI features
? BRI interface in accordance with ITU-T I.430
? operation modes:
- TE (terminal simulation), NT mode (network simulation), like PRI
- Monitor, passively monitoring the BRI, functional range like PRI
? Automatic detection of access configuration:
- Point-to-point (P-P) or point-to-multipoint (P-MP)
- Detection of DSS1 protocol
? Additional protocols: Cornet-T / -N / -NQ, QSIG, VN4
? Display of layers 1, 2, 3 and the B channel status
? Display of layer 1 info (info 0 up to info 4)
? -interrogation (depends on the support of the exchange)
? Automatic test of ISDN services and supplementary services
- Similar to the functional range of PRI
? Bus status test with interrogation; setup, display and clearing of the
active call diversions CFU, CFB, CFNR for all services
? Two connections simultaneously (loop box and extended self-call)
? Automatic X.31 test in D and B channel
- “Packet data in D channel available?"
- Automatic detection of the TEIs activated in the frame handler
- Simulation of X.31(D)-terminal to X.25 network
? Measurement of delay, round trip delay and inter-channel delay
? Layer 1 tests: measurement and evaluation of the phantom feed
(OK, NORMAL or restricted power) and the layer 1 send/receive
signal level of the NTBA or PABX
? D channel BERT with various bit pattern, like PRI
(compatible with other testers)
ARGUS?125 – ISDN U interface features
? U interface in accordance with ETR 80 / ANSI T1.601
? Line coding: 4B3T or 2B1Q available
? Test in TE mode on U interface same as on BRI/PRI
? Measurement of U interface voltage and OK evaluation
? Programmable DC load (up to 1200 mW, incl. U/I measurement)
? High-Z monitor with listen-to on U interface (q. v. POTS)
ARGUS?125 – Analog features (POTS)
? POTS interface with DTMF and pulse dial mode
? Flash function (40-1000 ms)
? Loop current limiting
? POTS voltage measurement incl. polarity (for hook-on / hook-off)
? CLIP and other caller ID services acc. ETS 300 659/778
? Supports display FSK and DTMF caller ID
? Adjustable DTMF signal level, signal and interval length
? High-Z monitor with non-intrusive listen-to on POTS (like on U)
- Measurement of voltage incl. polarity
in TE mode up to 150 V
in monitor mode up to 250 V
- Online display of CLIP, date, time, caller ID services
- Online display of DTMF dialing tones incl. A, B, C, D, *, #
ISDN测试仪(BRI PRI）德国 ISDN测试仪(BRI PRI）德国 |
